Saturday 25 October 2014

Pixel Carousel Horse

This tutorial was written by Monti on September 27th 2008. It's concept is copyrighted to Monti. Any creation you make from my ideas are yours. You may print out this tutorial for your own personal use, but please do not copy it in any way to put online, pass out or rewrite without my permission or worse yet attempt to claim as your own.

For this tutorial you will need 

Paint Shop Pro

The Following Colour Chart 
Save and open in PSP.
This colour chart is just a guide, feel free to use whatever colours you want.
Ok we are ready to start.

REMEMBER TO SAVE OFTEN 

Step 1: - Outline
We will be be making the Horse shown above. The outline below have been resized a lot so you can see it clearly.
To make this easier I have numbered all pixels over 1.
Select the brush tool with the following settings.
Size: 1 - Hardness, Opacity and Density: 100 
Zoom in to about 800% - 1000% 
Set your foreground to either colour 1 or 2 on the outline colour chart depending on where you want to start your outline.
Change the colours as you go. The yellow is Colour 1 (#E5CF9D) - the blue is Colour 2 (#6B859E) - the pink is Colour 3 (#9E6C75).

Open a new image 200 x 200 and fill with white so you can see what you are working on and draw your outline.
Use black for the eye outline and white for the eye inner. 
______________________________

Step 2: - Blue Fills
When the outline is complete select your magic wand with the following settings.
We are going to do all the blue areas first.
With your Magic Wand on the settings shown above click inside the left mane area - the part above the face.
Set your Foreground to Colour 6 (#B5C2D0) on your colour chart and flood fill this selection. 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 5
Shadow colour: #6B859E
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.

Select your magic wand with the same settings and click inside the large mane area.
Fill this selection with Colour 6 (#B5C2D0). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 8
Shadow colour: #6B859E
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.

Select your magic wand with the same settings and click inside the tail.
Fill this selection with Colour 6 (#B5C2D0). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 7
Shadow colour: #6B859E
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.

Select your magic wand with the same settings and click inside the hoof on the very left.
Fill this selection with Colour 6 (#B5C2D0). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 2
Shadow colour: #6B859E
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect. 
Repeat this cutout for the other 3 hooves.
______________________________

Step 3: - Yellow Fills
With your Magic Wand on the settings shown above click inside the nose area.
Set your Foreground to Colour 5 (#FDF9EB) on your colour chart and flood fill this selection. 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 3
Shadow colour: #E5CF9D
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.

Select your magic wand with the same settings and click inside the face area.
Fill this selection with Colour 5 (#FDF9EB). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 4
Shadow colour: #E5CF9D
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.

Select your magic wand with the same settings and click inside the neck area.
Fill this selection with Colour 5 (#FDF9EB). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 8
Shadow colour: #E5CF9D
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.

Select your magic wand with the same settings and click inside the shoulder area.
Fill this selection with Colour 5 (#FDF9EB). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 6
Shadow colour: #E5CF9D
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.

Select your magic wand with the same settings and click inside the rear area.
Fill this selection with Colour 5 (#FDF9EB). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 8
Shadow colour: #E5CF9D
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.

Select your magic wand with the same settings and click inside the back leg.
Fill this selection with Colour 5 (#FDF9EB). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 3
Shadow colour: #E5CF9D
Make sure fill interior with colour is UNchecked. 
DO NOT Deselect.
Add noise - uniform and monochrome checked - 3%
Deselect.
______________________________

Step 4: - Pink Fills
With your Magic Wand on the settings shown above click inside the ALL the spaces in the nose band.
Set your Foreground to Colour 7 (#D0B6BB) on your colour chart and flood fill this selection. 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 3
Shadow colour: #9E6C75
Make sure fill interior with colour is UNchecked. 
Deselect.

Select your magic wand with the same settings and click inside the head band.
Fill this selection with Colour 7 (#D0B6BB). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 4
Shadow colour: #9E6C75
Make sure fill interior with colour is UNchecked. 
Deselect.

Select your magic wand with the same settings and click inside the shoulder/neck band.
Fill this selection with Colour 7 (#D0B6BB). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 7
Shadow colour: #9E6C75
Make sure fill interior with colour is UNchecked. 
Deselect.

Select your magic wand with the same settings and click inside the stomach band.
Fill this selection with Colour 7 (#D0B6BB). 
Keep selected. 
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 9
Shadow colour: #9E6C75
Make sure fill interior with colour is UNchecked. 
Deselect.
______________________________

Finally hide the white background and go to Edit - Copy and paste the horse as a new layer onto your carousel. 
Duplicate the horse layer and move both horses into position. See my tag for a guide.

Save as a png.


No comments:

Post a Comment