This tutorial was written by Monti on September 7th 2009. It's concept is copyrighted to Monti. Any creation you make from my ideas are yours. You may print out this tutorial for your own personal use, but please do not copy it in any way to put online, pass out or rewrite without my permission or worse yet attempt to claim as your own.
For this tutorial you will need
Paint Shop Pro
The Following Colour Chart
Save and then open in PSP.
Of course you are free to use any colours you want.
Ok we are ready to start.
REMEMBER TO SAVE OFTEN
Step 1:
We will be be making the Giraffe shown below. The outlines below have been resized a lot so you can see them clearly.
I have done the outline in 2 parts, we will be starting with the top half of the Giraffe.
To make this easier I have numbered all pixels over 1.
Open a new image 200 x 200 transparent.
Flood fill with white so you can see what you are working on. Delete this layer at the end.
Turn the grid on so you can see the single pixels by going to View - Grid - then View - Change Grid, Guide and Snap Properties. Under Current Image Settings change the Horizontal and Vertical grids to 1.
Add a new Raster Layer and name Outline.
Select the brush tool with the following settings.
Size: 1 - Hardness, Opacity and Density: 100
Zoom in to about 800% - 1000%
Change colours as you go as indicated on the outline chart.
The main outline is colour 1 (#C07A36), the spot outline is colour 3 (#5A2F18) and the inner ear outline is colour 5 (#E09A98) on your colour chart.
I find it easier to start at the highest point, in this case one of his horns. (You can move the image later using your move tool if you need to).
Set your foreground to colour 3 on the colour chart (#5A2F18) and start drawing the Giraffe outline.
When you have completed that outline we will carry on with the outline below.
NOTE: The parts shown in pink are the parts you have already drawn from the first outline.
Step 2:
When all of your outline is complete, select your magic wand with the following settings and click inside the left horn.
Add a new raster layer called Fill and move this beneath your outline layer in the layer palette.
Select colour 4 (#CF682F) on your Giraffe colour chart, click on the Fill layer to activate it and flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 3
Shadow colour: Use your horn outline. Colour 3 (#5A2F18).
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat this for the right horn making sure that you fill on the Fill layer.
Step 3:
Select your magic wand and making sure you are on the outline layer click inside the upper head area.
Select colour 2 (#EFDA7F) on your Giraffe colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 85
Blur: 14
Shadow colour: Use your main outline. Colour 1 (#C07A36).
Make sure fill interior with colour is UNchecked.
Deselect.
Step 4:
Select your magic wand and making sure you are on the outline layer click inside the lower head area.
Select colour 2 (#EFDA7F) on your Giraffe colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 85
Blur: 5
Shadow colour: Use your main outline. Colour 1 (#C07A36).
Make sure fill interior with colour is UNchecked.
Deselect.
Step 5:
Select your magic wand and making sure you are on the outline layer click inside the left outer ear.
Select colour 2 (#EFDA7F) on your Giraffe colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 85
Blur: 5
Shadow colour: Use your main outline. Colour 1 (#C07A36).
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat for the other outer ear making sure you fill on the fill layer.
Step 6:
Select your magic wand and making sure you are on the outline layer click inside the body.
Select colour 2 (#EFDA7F) on your Giraffe colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 85
Blur: 12
Shadow colour: Use your main outline. Colour 1 (#C07A36).
Make sure fill interior with colour is UNchecked.
Deselect.
Step 7:
Select your magic wand and making sure you are on the outline layer click inside the left leg.
Select colour 2 (#EFDA7F) on your Giraffe colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 85
Blur: 8
Shadow colour: Use your main outline. Colour 1 (#C07A36).
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat for the other leg making sure you fill on the fill layer.
Step 8:
Select your magic wand and making sure you are on the outline layer click inside the left inner ear.
Select colour 6 (#FFCDCE) on your Giraffe colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 5
Shadow colour: Use your inner ear outline. Colour 5 (#E09A98).
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat for the right inner ear making sure you fill on the fill layer.
Step 9:
Select your magic wand and making sure you are on the outline layer click inside the mouth.
Select colour 4 (#CF682F) on your Giraffe colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 2
Shadow colour: Use your mouth outline. Colour 3 (#5A2F18).
Make sure fill interior with colour is UNchecked.
Deselect.
Step 10:
Select your magic wand and making sure you are on the outline layer click inside one of the spots.
Select colour 4 (#CF682F) on your Giraffe colour chart and making sure you are on your fill layer flood fill that selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 6
Shadow colour: Use your spot outline. Colour 3 (#5A2F18).
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat for the other spots making sure you fill on the fill layer.
Delete the White layer.
Merge all visible and save as a png.
No comments:
Post a Comment