This tutorial was written by Monti on September 25th 2007. It's concept is copyrighted to Monti. Any creation you make from my ideas are yours. You may print out this tutorial for your own personal use, but please do not copy it in any way to put online, pass out or rewrite without my permission or worse yet attempt to claim as your own.
For this tutorial you will need
Paint Shop Pro
The Following Colour Chart
Save and then open in PSP
Of course you are free to use any colours you want.
Hair
I have supplied 7 different shades. Please do NOT pass this around in any way or use with any other tutorial.
Click HERE to download.
Ok we are ready to start.
REMEMBER TO SAVE OFTEN
Step 1:
We will be starting with the main body outline. The outlines below have been resized a lot so you can see them clearly.
I have done the outline in several parts.
To make this easier I have numbered all pixels over 1.
Open a new image 200 x 200 transparent.
Select the brush tool with the following settings.
Size: 1 - Hardness, Opacity and Density: 100
Zoom in to about 800% - 1000%
Set your foreground to colour 1 on the outline colour chart (#CA8368) and start at the top center of your canvas.
Start by drawing her head.
Step 2:
When you get to her shirt change your foreground to colour 3 on the outline colour chart (#CB6D8A) or a colour of your choice and draw in the shirt outline shown in outline above.
When you get to her nappy/diaper change your foreground to colour 5 on the outline colour chart (#D7D1B3) or a colour of your choice and draw in the diaper outline shown in outline above.
Remember to add the grey (#808080) diaper pin shown in the outline.
Step 3:
When your outline is complete, select your magic wand with the following settings and click inside the Head.
Select colour 2 (#F6CDBE) on your colour chart and flood fill this selection.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 7
Shadow colour: Use your head outline.(#CA8368)
Make sure fill interior with colour is UNchecked.
Deselect.
Select your magic wand with the same settings and click inside her neck area.
Fill with colour 2 (#F6CDBE) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 4
Shadow colour: Use your head outline.(#CA8368)
Make sure fill interior with colour is UNchecked.
Deselect.
Select your magic wand with the same settings and click inside her left arm as you look at it.
Fill with colour 2 (#F6CDBE) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: -1
Horizontal: 0
Opacity: 100
Blur: 4
Shadow colour: Use your arm outline.(#CA8368)
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat for the other arm.
Select your magic wand with the same settings and click inside her belly.
Fill with colour 2 (#F6CDBE) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 5
Shadow colour: Use your body outline.(#CA8368)
Make sure fill interior with colour is UNchecked.
Deselect.
Select your magic wand with the same settings and click inside her left foot.
Fill with colour 2 (#F6CDBE) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 7
Shadow colour: Use your foot outline.(#CA8368)
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat for the right foot.
Select your magic wand with the same settings and click inside her left leg.
Fill with colour 2 (#F6CDBE) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 2
Horizontal: 0
Opacity: 100
Blur: 3
Shadow colour: Use your leg outline.(#CA8368)
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat for the right leg.
Step 4: - T Shirt
Select your magic wand with the same settings and click inside her T Shirt.
Fill with colour 4 (#EECCD6) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 100
Blur: 6
Shadow colour: Use your t shirt outline.(#CB6D8A)
Make sure fill interior with colour is UNchecked.
Deselect.
Step 5: - Diaper
Select your magic wand with the same settings and click inside the middle section of the diaper.
Fill with colour 6 (#FBF9EF) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 85
Blur: 3
Shadow colour: Use your diaper outline.(#D7D1B3)
Make sure fill interior with colour is UNchecked.
Deselect.
Select your magic wand with the same settings and click inside the left section of the diaper. Make sure you get the stray pixels shown in the screen shot below.
Fill with colour 6 (#FBF9EF) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 85
Blur: 3
Shadow colour: Use your diaper outline.(#D7D1B3)
Make sure fill interior with colour is UNchecked.
Deselect.
Repeat for the other side.
Step 6: - Face
Add a new raster layer and draw on your face using the guide below.
Use colour 1 (#CA8368) for the eyebrows and nose.
Use black for the eyelashes.
Use a light and dark colour of your choice for the eyes remembering to add a white pixel in each bottom corner.
Use colour 8 (#CB5B73) for the bottom lip and colour 9 (#E38D9D) for the top lip.
Step 7:
Open a new image 200 x 100 transparent.
Set your foreground to colour 5 on the outline colour chart (#D7D1B3) and draw in your wings using the guide below. The wings are symmetrical so I have only added the counts for one side.
Select all inside areas with your magic wand making sure you select the stray pixels shown below. Remember to select them on both sides.
Fill with colour 6 (#FBF9EF) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 95
Blur: 3
Shadow colour: Use your wings outline.(#D7D1B3)
Make sure fill interior with colour is UNchecked.
Do NOT Deselect.
Go to Adjust - Add noise - uniform and monochrome checked - 5%
Deselect.
Copy and paste this onto your girl position in the center and move them up slightly. See my tag for guide.
Move this layer to the bottom.
Step 8: - Hair
Activate the top layer and either draw on hair in the style of your choice or open my hair tube and choose one of the colours. Copy and paste it as a new layer and position it. Use my tag as a guide.
Step 9: - Bow
Open a new image 25 x 25 transparent and zoom in.
Set your foreground to colour 3 on the outline colour chart (#CB6D8A) and using the guide below draw out a bow.
Select your magic wand with the same settings and click inside all sections of the bow.
Fill with colour 4 (#EECCD6) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 95
Blur: 4
Shadow colour: Use your bow outline.(#CB6D8A)
Make sure fill interior with colour is UNchecked.
Deselect.
Copy and paste onto the hair (move layer to top) and position. Duplicate and mirror.
Step 10: - Dummy/Pacifier
Open a new image 25 x 25 transparent and zoom in.
Set your foreground to colour 3 on the outline colour chart (#CB6D8A) and using the guide below draw out a pacifier.
Select your magic wand with the same settings and click inside the top and bottom sections of the pacifier.
Fill with colour 4 (#EECCD6) on your colour chart.
Keep selected.
Selections float, Effects 3D effects, Cutout with the following settings
Vertical: 0
Horizontal: 0
Opacity: 95
Blur: 3
Shadow colour: Use your pacifier outline.(#CB6D8A)
Make sure fill interior with colour is UNchecked.
Deselect.
Copy and paste as a new layer on your canvas. Position it just under her nose.
Merge all visible and save as a png.
No comments:
Post a Comment